Back

LCD Standard Resin Grey 500ml

4,999.00 3,399.00

Quantity Net 500ml or 1/2 kgs
Product Advantage:

Super Low Odor

Colors can be mixed for new colors

High detail prints

High hardness with tenacity

Non VOC, RoHS certificated

Compatible for most 3D printer (This LCD Standard Resin Grey is compatible with printers like Tech 4.0s, Anycubic LDC printers, Creality lcd printer , Elegoo mars LCD Printers, Qidi S box LCD Printers to name a few…)

Category:
Description

Description

WOL3D LCD Standard Resin Grey Product advantage:
  • Super Low Odor
  • Colors can be mixed for new colors
  • High detail prints
  • High hardness with tenacity
  • Non VOC, RoHS certificated
  • Compatible for most 3D printer

This LCD Standard Resin Grey is compatible with printers like Tech 4.0s, Anycubic LDC printers, Creality LD002R lcd printer , Elegoo mars LCD Printers , Creality LD002H , Qidi S box LCD Printers to name a few…

Cleaning and Post-curing

Cleaning For Standard resin:
  1. Step1, Spray with Isopropanol, then blow resin away with cool wind.
  2. Step2, Prepare two containers with Isopropanol (alcohol> 95%), and place the jobs into the first container and slightly shake it, then soak in the second container for about 1 minute (dental resin should not exceed 30 seconds).
  3. Step3, Flush with water before dry it, do make it sure it ‘s 100% dried as residuary alcohol may cause white spot or crack on jobs.
Post-curing: 
  1. The curing time is proportional to the volume of the work piece and inversely proportional to the optical power of the curing chamber. Example: 100 watt LED curing box, jewelry jobs is recommended to be cured with soaking in water for 20-30 minutes.
  2. The post-cure time of dental casting resin, dental non-casting resin and jewelry mold resin shall not be more than 5 minutes.
  3. Work-pieces should be in the water during post-curing to prevent deformation especially for dental and jewelry.
  4. Don’t forget to use cool air to dry it after post-curing.

Printing Parameters

  1. These series works perfectly on most brand LCD printer, and fast printing on DLPs.
  2. For LCD printer, bottom layer 30-70s and each layer exposure time 4-12s, for example, layer thickness 50 micron on Anycubic printer, base 50s while each layer 8s.
  3. For DLP printer, bottom 10-15s and each layer 1-6s.
  4. The exposure time should be adjusted according to printer light energy, layer thickness and model structure.

Technical Specification

Flexural modulus:1.882-2.385Mpa

Elongation at break:4-10%

Flexural strength :59-70MPa

Shore Hardness:85-88 D

Glass transition temp.:100℃

Thermal expansion:95*E-6

Hot deformation temp.:65℃

Density:1.05—1.25 g/cm3

Volume shrinkage:3.72%-4.24%

Notched impact strength : 44-49j/m

Linear shrinkage:1.05-1.35%

Viscosity:100-450MPa•s

Tensile strength:36-52MPa

Tensile modulus:1.779—2.385 MPa

LCD Resin

Warning:

  1. This material should not be in contact with eyes, skin or clothing, and should not be tasted or eaten.
  2. If you accidentally touch your eyes or skin, immediately rinse with water for about 20 minutes and seek medical advice if necessary.
  3. Please pay attention to air circulation and take protective measures when using. Wash thoroughly after handling.
  4. The product is in a liquid state with a slight odor. Wear a mask and gloves.
  5. The product should be stored in a sealed container. After use, it should be filtered and keep back in bottle on time and placed in a dry and well ventilated place. It should not be exposed to sunlight.
  6. Shake well before use, and leave it for 30 minutes to eliminate air bubbles that generated during the shaking process.
  7. The ambient temperature is recommended to be controlled at 25-30 degrees Celsius, and during the printing should avoid any lights.
  8. Dispose of waste in accordance with local environmental regulations.
  9. Storage environment: Store in cool and dry place, and avoid sunlight, recommended temperature at 25-30 degrees Celsius.
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “LCD Standard Resin Grey 500ml”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat net

Vestibulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames.Consequat netus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac vestibulum amet elit