Bambu Lab A1 mini [Pre Order – Delievery Date (20 July) – Non-Returnable]

Original price was: ₹33,999.Current price is: ₹27,999.
Pre Order – Delievery Date (20 July)
30 people are viewing this right now
Available on backorder
New 20k+ Cart Line
Guaranteed safe & secure checkout


Bambu Lab A1 mini – A Colorful Gateway to 3D Printing

Plug-N-Play Turn the once steep learning curve into a enjoyable journey

The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print.

Full-Auto Calibration

Goodbye to Tedious Manual Calibration And Tuning

Auto Z-Offset
A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Auto Bed-Level
No More “Paper Method”

A1 mini probes the bed with the nozzle to measure the absolute z-offset. No need to stick a paper as reference.

Auto Tune Both X & Y Resonance Before Every Print

A1 mini has sensors in toolhead and heatbed. One of the very first bed-slinger printers to run auto resonance calibration on both X & Y axes.

Fully Automated PA (Pressure Advanced) Calibration

First of its kind, A1 mini runs the nozzle pressure based flow dynamics calibration algorithm. No need to draw any pattern or get any manual pick & match involved, A1 mini handles Pressure Advanced calibration automatically.

Auto Monitoring And Adjusting The Belts

A1 mini can check the belt tension automatically through the vibration frequency calibration. If the belt is loose, the HMS system will notify you to use the auto belt tensioner to set the belt to the right tension.

Load/Unload Filament With One Touch
No manual setting involved, A1 mini fully automated the filament load/unload process.

Active Flow Rate Compensation , Print Smooth At Every Corner, Always

The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

High-speed Precision – Bed Slinger with CoreXY Speed And Quality

Full-metal Rails, Rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Technical Specifications A1 mini

Build Volume: 180 x 180 x 180 mm³
Chassis: Steel + Extruded Aluminum
Hot End: All-Metal
Extruder Gears: Hardened Steel
Nozzle: Stainless Steel
Max Hot End Temperature: 300 ℃
Nozzle Diameter (Included): 0.4 mm
Nozzle Diameter (Optional): 0.2 mm, 0.6 mm, 0.8 mm
Filament Cutter: Yes
Filament Diameter: 1.75 mm
Compatible Build Plate: Bambu Textured PEI Plate
Bambu Smooth PEI Plate
Bambu Dual-Texture PEI Plate
Max Build Plate Temperature: 80 ℃
Max Speed of Toolhead: 500 mm/s
Max Acceleration of Toolhead: 10000 mm/s²
Max Hot End Flow: 28 mm³/s @ABS (Model: 150*150 mm single wall;
Material: Bambu ABS; Temperature: 280 ℃)
Part Cooling Fan: Closed Loop Control
Hot End Fan: Closed Loop Control
MC Board Cooling Fan: Closed Loop Control
Supported Filament
ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer: Not Recommended
Monitoring Camera: Low Rate Camera (up to1080P) Timelapse Supported
Filament Run Out Sensor: Yes
Filament Odometry: Yes
Power Loss Recover: Yes
Filament Tangle Sensor: Yes
Physical Dimensions
Dimensions: 347 x 315 x 365 mm³
Net Weight : 5.5 kg
Electrical Requirements
Input Voltage: 100-240 VAC, 50/60 Hz
Max Power: 150 W
Display: 2.4 inches 320*240 IPS Touch Screen
Connectivity: Wi-Fi, Bambu-Bus
Storage: Micro SD Card
Control Interface: Touch Screen, APP, PC Application
Motion Controller: Dual-Core Cortex M4
Slicer: Bambu Studio supports third-party slicers which export standard Gcode such as SuperSlicer, PrusaSlicer and Cura, but certain
advanced features may not be supported.
Slicer Supported OS: MacOS, Windows
Frequency Range: 2412 MHz – 2472 MHz (CE)
2412 MHz – 2462 MHz (FCC)
2400 MHz – 2483.5 MHz (SRRC)
Transmitter Power (EIRP): ≤ 21.5 dBm (FCC)
≤ 20 dBm (CE/SRRC)
Protocol: IEEE 802.11 b/g/n

For multicolor printing you can Buy A1 mini combo with AMS Lite  https://worldoflilliputs.com/product/bambu-lab-a1-mini-3d-printer/


For more updates check our Instgram https://www.instagram.com/wol3dindia/
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Price
  • Add to cart
  • Weight
  • Dimensions
  • Additional information
  • Brand
  • Color
  • Length
  • Model Name
  • Standard Fillament
  • Weight
Click outside to hide the comparison bar

Download Our Brochure!