Phrozen Sonic Mega 8K S Resin 3D Printer with combo with washing, curing machine , Aqua grey Resin and Pump
- Print Volume: L33 x W18.5 x H30 cm
- Layer Thickness: 0.01-0.30 mm
- Design: Technology Resin 3D Printer – LCD Type
- XY Resolution: 43 µm
- Average Printing Speed: 400 layers/hr
![New 20k+ Cart Line](https://worldoflilliputs.com/wp-content/uploads/2022/11/New-20k-Cart-Line.png)
Description
Phrozen Sonic Mega 8K S Resin 3D Printer – Top Quality, But Affordable Price
Buy now printer with washing and curing machine , Pump & Fill and Aqua 4k Resin-Gray.
Enjoy Massive Build Plate
Equipped with a 15-inch build plate, it’s your best choice to mass-produce full plates of miniatures or print medium to large-sized models all in one piece—eliminating the need to batch-print your models, increasing convenience and efficiency!
Model By Printed Obsession
Print 80 Models in 1.5 Hours
Known for its spacious printing volume, the 15” perforated build plate of the Sonic Mega 8K S can comfortably fit up to 80 of this 1/32 soldier models in one batch.
Benefits
- 8K Printing Capabilities: The Sonic Mega 8K S was designed with prints quality in mind, maintaining a striking 43 µm resolution, even at twice the size of typical desktop 3D printer.
- High Productivity Machine: Equipped with the new high-speed system, it prints faster than ever for its size.
- 15” Mono-LCD Screen: The largest Mono-LCD printing area on the consumer market with a 15” LCD and perforated building plate.
- Lift-Up Lid: Occupy less space in your studio while maintaining easy access to prints.
- Built-In Drip Hanger: Let your resin drips on an angle after printing, save every drip and it’s easier to clean.
- Pre-Calibrated Building Plate: All Sonic Mega 8K S building plates are pre-calibrated before shipping. Get it out of the box and start printing immediately.
- Seamless Integration With Pump & Fill*: The Pump & Fill integrates seamlessly with the Sonic Mega 8K S printer system. Adjust your settings directly from the printer’s touchscreen.
Phrozen Sonic Mega 8K S Resin 3D Printer Specs
- System: Phrozen OS
- Operation: 3.5″ Touch Panel
- Slicer Software: CHITUBOX V1.9.6 and above (or others)
- Connectivity: USB
- Design: Technology Resin 3D Printer – LCD Type
- Light Source: 405nm ParaLED® Matrix 3.0
- Release Film: ACF Film
- XY Resolution: 43 µm
- Layer Thickness: 0.01-0.30 mm
- Average Printing Speed: 400 layers/hr
- Power Requirement: AC100-240V;50-60Hz
- System Power: Max 240 W
- Printer Size: L47.2 x W38 x H56.6 cm
- Print Volume: L33 x W18.5 x H30 cm
- Printer Weight: 26 kgFor more updates check our Instagram https://www.instagram.com/wol3dindia/
![Capture](https://worldoflilliputs.com/wp-content/uploads/2024/05/Capture-1.jpg)
![Capture 2](https://worldoflilliputs.com/wp-content/uploads/2024/05/Capture-2-1.jpg)
![Capture 5](https://worldoflilliputs.com/wp-content/uploads/2024/05/Capture-5-2.jpg)
![Capture 6](https://worldoflilliputs.com/wp-content/uploads/2024/05/Capture-6-2.jpg)
Additional information
Brand | Phrozen |
---|
There are no question found.
Rating & Review
There are no reviews yet.