Bambu Lab PLA – CF Black 3D Filament
- Diameter: 1.75mm +/- 0.03mm
- Improved Mechanical Properties
- Carbon Fiber Texture & Minimized Layer Lines
Description
Bambu Lab PLA CF 3D Filament – Carbon Fiber Reinforced PLA
Product Features
- Carbon Fiber Texture & Minimized Layer Lines
- Improved Mechanical Properties
- Stablized Printing Dimension
- Comes with Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Cautions for Use
- 0.2 mm Nozzle Not Compatible
- Stainless Steel Nozzle Not Recommended
- Dry before Use for the Highest Print Quality
- AMS Compatible
Bambu PLA-CF
Bambu PLA-CF is carbon fiber reinforced PLA with improved stiffness and strength. PLA-CF is easy to print and beginner-friendly like regular PLA. It is AMS compatible with low clogging risk at high-speed printing. The prints are in matte finish with almost invisible layer lines, which make it suitable for printing general engineering parts or models requiring a better appearance, like bike frames, brackets and toys.
Carbon fiber texture & Minimized layer lines
The addition of carbon fiber gives prints a unique matte finish and effectively hides layer lines, providing a smooth, premium look.
Accessory Compatibility
| Recommended | Not Recommended | |
| Build Plate | Cool Plate, High Temperature Plate or Textured PEI Plate | Engineering Plate |
| Hotend | Hardened Steel Nozzle (0.4 / 0.6 / 0.8 mm） | Stainless Steel Nozzle (0.2 / 0.4 mm) |
| Glue | Bambu Liquid Glue Glue Stick |
/ |
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Bambu Lab PLA CF 3D Filament
Filament Type - Carbon Fiber Infill Hotend Compatibility - Hardened Steel (0.4, 0.6, 0.8 mm) Build Plate Compatibility - Cool Plate, High Temperature Plate, Textuerd PEI Plate AMS Compatibility - Yes Surface - Matte Print Speed - < 200 mm/s Toughness (Impact Strength - XY) - 23.2 kJ/m² Strength (Bending Strength - XY) - 89 MPa Stiffness (Bending Modulus - XY) - 3950 MPa Layer Adhesion (Impact Strength - Z) - 7.8 kJ/m² Heat Resistant（HDT, 0.45 MPa） - 55 °C
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
| Printing and Keeping Container’s Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 210 – 240 °C |
| Bed Temperature (with Glue) | 35 – 45 °C |
| Printing Speed | < 200 mm/s |
| Physical Properties | |
| Density | 1.22 g/cm³ |
| Vicat Softening Temperature | 69 °C |
| Heat Deflection Temperature | 55 °C |
| Melting Temperature | 165 °C |
| Melt Index | 3.7 ± 0.6 g/10 min |
| Mechanical Properties | |
| Tensile Strength | 38 ± 4 MPa |
| Breaking Elongation Rate | 8.4 ± 3.2 % |
| Bending Modulus | 3950 ± 190 MPa |
| Bending Strength | 89 ± 4 MPa |
| Impact Strength | 23.2 ± 3.7 kJ/m² |
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
Additional information
| Brand | Bambu Lab |
|---|
There are no question found.
Rating & Review
There are no reviews yet.